Skip to main content
Ocean State Powder Coating logo
Powder coating work at the Warwick, RI shop

Serving Marlborough, MA

Powder Coating for Marlborough, MA

To be clear from the start: our shop is in Warwick, Rhode Island. Marlborough customers drive down, typically about an hour or a little more depending on I-495 traffic.

Call (401) 919-5579
  • 94 Google reviews
  • Shop in Warwick, RI
  • Free quote from a photo

The short answer

Powder coating for Marlborough drivers and businesses

Ocean State Powder Coating serves Marlborough from its only shop at 100 Minnesota Ave in Warwick, RI. The drive is typically about an hour or a little more, via I-495 or Route 146 and I-295, depending on traffic. All coating and repair is done in Warwick. Text a photo for a ballpark price; the final price is set when the part is at the shop.

Marlborough sits where I-495, I-290 and Route 20 meet, so a lot of the cars here put on serious highway miles. High mileage means more brake dust baked onto the wheels, more stone chips and more exposure to winter brine.

Text us a photo of your wheels or calipers and the color you have in mind. You get a ballpark price before you commit to the drive.

Commuter miles on 495 and Route 20

Daily runs on I-495 and I-290, plus stop-and-go on Route 20 (Boston Post Road) past the shopping plazas, put a steady load of brake dust and road grime on wheels. Over time that dust bonds to the finish and starts to pit it.

In winter the highways are treated heavily with salt and brine. On a factory wheel, that salt gets under chipped clear coat and starts corrosion. Powder coating strips the wheel to bare metal, blasts it clean and builds a thicker, harder finish that generally holds up better to that cycle.

Calipers and a custom look

Plenty of Marlborough-area drivers want more than a refresh. Painted calipers that match the body color, a gloss black or bronze wheel, or a satin gunmetal set are common requests. The Prismatic Powders library has thousands of colors and finishes to choose from.

If you have a color in mind, send a reference photo. We also do custom color matching when you need a finish to line up with something you already have.

Lake season and backyard metal

Between Fort Meadow Reservoir and Lake Williams, there are boat and dock owners around Marlborough with metal parts that see a lot of water. We coat boat and marine parts, along with patio tables and chairs, iron railings and home radiators.

Motorcycle owners bring us frames, wheels and smaller parts too. Text a photo with rough dimensions and we will confirm it fits our oven before you make the trip.

Why Marlborough customers use our shop

  • 20+ years in business, at one shop in Warwick, RI
  • Ballpark price by text photo before the drive from Marlborough
  • Caliper coating and custom color matching with Prismatic Powders
  • If the finish is not right, we redo it at no cost

Services for Marlborough

Google Reviews

What customers say

From our 94 reviews on Google.

  • “I recently had my CRV wheels powder coated black and couldn’t be happier. Ocean State did a terrific job in less than two days.”

    Jennifer Hebert

    Google review

  • “I was immediately impressed with the communication and turnaround time. I was quoted a figure, and they held to it. That almost never happens with any work I have done on this custom truck.”

    Michael Narbut

    Google review

  • “Quick turn around time, fair pricing, quality work. Parts were wrapped well at pickup to prevent damage in transport. Would use again.”

    josh u

    Google review

Reviews collected from Google Business Profile.

Powder coating in Marlborough: questions

No. All work is done at our shop at 100 Minnesota Ave in Warwick, RI, typically about an hour or a little more from Marlborough. We do not have drop-off points or mobile service.
Yes. Calipers are cleaned and coated with a high-temperature powder in the color you choose. Text a photo of the car and calipers and we will send a ballpark price.
No. Bring the wheels with tires mounted. We dismount, coat, cure, remount and balance them at the shop. TPMS sensors are removed before the wheel goes in the oven.
A photo does not show everything: hidden cracks, bends or old repairs can change the job. We give a ballpark from the photo and set the final price once the part is at the shop.

Getting to the shop

100 Minnesota Ave, Units 5 & 6, Warwick, RI 02888
Monday to Friday, 8:00 AM to 4:30 PM

Also serving: Hudson, Northborough, Southborough, Sudbury, Framingham, Berlin.

Send a photo of your wheels or parts from Marlborough. We reply with a ballpark price and the next steps.

From the blog

Guides & Resources

Straight answers on cost, durability, curb rash, cracked rims and colors.

View all guides