“I was immediately impressed with the communication and turnaround time. I was quoted a figure, and they held to it. That almost never happens with any work I have done on this custom truck.”
Michael Narbut
Google review
Serving Milford, MA
Powder Coating for Milford, MA
Our shop is in Warwick, Rhode Island, and Milford is one of the closer Massachusetts towns we serve. The drive is typically under an hour, so it fits into a normal day.
- 94 Google reviews
- Shop in Warwick, RI
- Free quote from a photo
The short answer
Powder coating for Milford drivers and businesses
Ocean State Powder Coating serves Milford, MA from its only shop at 100 Minnesota Ave in Warwick, RI. The drive is typically under an hour, usually via Route 146 or I-495 and I-295, depending on traffic. All blasting, repair and coating is done in Warwick. Text a photo for a ballpark price; the final price is set once the part is at the shop.
Milford drivers split their time between I-495 and the local roads: Main Street (Route 16), Route 140 and Route 85. Highway salt in winter, plus potholes on town roads in spring, is a hard combination for wheels.
Text us a photo of your wheels or parts. We will send a ballpark price and tell you what the job likely needs before you head down.
Between I-495 and the town roads
I-495 gets heavy salt and brine treatment through the winter, and so do Route 16 and Route 140 through downtown Milford. That salt gets into chips and curb rash and starts corrosion under factory clear coat, which is why so many wheels here show peeling at the lip.
When the frost comes out of the ground, potholes open up on side streets and around the commercial strips. A hard hit can bend a rim or crack a barrel. We inspect each wheel first, straighten bends where possible and weld cracks only when they are in a safe area.
Contractors and the building trades
Milford has a long history of granite quarrying and a strong base of contractors and tradespeople today. Many of them bring us truck wheels, trailer parts, racks, brackets and fabricated metal that need a finish able to take a beating.
We sandblast parts down to bare metal to remove rust, paint and old coatings, then powder coat them. For businesses with recurring work, we handle batches of parts, not just one-offs. Text photos and quantities for a ballpark price.
Around the house and on the water
Wrought iron railings on front steps and porches are one of the most common non-wheel jobs we see from towns like Milford. Blasting off the old paint and rust and powder coating the railing generally lasts much longer than another coat of spray paint.
We also coat patio tables and chairs, home radiators, motorcycle parts and boat parts for owners who keep a boat on a nearby lake or take it to the coast. If the finish is not right, we redo it at no cost.
Why Milford customers use our shop
- One shop in Warwick, RI, typically under an hour from Milford
- 20+ years in business coating wheels, calipers and metal parts
- Sandblasting plus batch powder coating for contractors and businesses
- If the finish is not right, we redo it at no cost
Services for Milford
- Wheel Powder CoatingFaded or peeling factory wheels
- Rim Repair & Curb Rash RepairCurb rash from parallel parking
- Cracked Wheel RepairInner barrel cracks from potholes
- Brake Caliper Powder CoatingCars with open-spoke wheels
- Sandblasting & Media BlastingWheels before refinishing
- Industrial Powder CoatingMetal fabricators
- Custom Color MatchingMatching wheels or calipers to your paint
- Tire Dismount, Mount & Wheel BalancingWheels coming in for powder coating
Google Reviews
What customers say
From our 94 reviews on Google.
“Quick turn around time, fair pricing, quality work. Parts were wrapped well at pickup to prevent damage in transport. Would use again.”
josh u
Google review
“Phenomenal job on sandblasting and priming my motorcycle frame!! Can’t wait to do more business with them!!”
matthew cesario
Google review
Reviews collected from Google Business Profile.
Powder coating in Milford: questions
Typically under an hour to 100 Minnesota Ave in Warwick, RI, depending on traffic and route. All work is done at that shop; we do not offer pickup or mobile service.
Often, yes. Many bent lips can be straightened, and cracks in safe areas can be welded. Cracks in spokes or near the hub usually mean the wheel should be replaced. We inspect every wheel before quoting the final price.
Yes. Railings are sandblasted to bare metal and then powder coated. Text a photo with rough length and height so we can confirm it fits our oven and send a ballpark price.
We use the Prismatic Powders library, with thousands of colors and finishes, from gloss and satin black to metallics, candy and textured looks. We can also do custom color matching.
Getting to the shop
100 Minnesota Ave, Units 5 & 6, Warwick, RI 02888
Monday to Friday, 8:00 AM to 4:30 PM
Also serving: Hopedale, Mendon, Bellingham, Holliston, Medway, Upton.
Send a photo of your wheels or parts from Milford. We reply with a ballpark price and the next steps.
From the blog
Guides & Resources
Straight answers on cost, durability, curb rash, cracked rims and colors.
How Much Does It Cost to Powder Coat Wheels? (2026 Price Guide)
A straight breakdown of what most shops charge to powder coat wheels and rims, and the factors that push a set of four up or down.
Read the guide
Powder Coating vs Painting Wheels: Which Finish Holds Up Better?
An honest side-by-side of powder coat and paint on wheels, covering durability, cost, finish options, and when paint is actually the better pick.
Read the guide
How Long Does Powder Coating Last on Wheels and Metal Parts?
Realistic lifespans for powder coat on wheels and metal parts, plus the salt, prep, and cleaning factors that decide whether it lasts.
Read the guide