“I wanted to thank you guys for the amazing job done to my wheels and brake calipers. The powder coat finish looks perfect and flawless!”
Jonathan M
Google review
Industrial Powder Coating · Warwick, RI
Industrial Powder Coating in Rhode Island
Fabricators, contractors and small manufacturers need coated parts that look consistent across a batch and hold up outdoors. Powder coating gives a tough, even finish without the runs and drips of liquid paint.
- 94 Google reviews
- Prismatic Powders colors
- Free quote from a photo
The short answer
Industrial Powder Coating in Warwick, RI: the short version
Industrial powder coating is the same oven-cured powder finish used on wheels, applied to metal parts in batches for businesses: brackets, railings, frames, enclosures and fabricated pieces. Ocean State Powder Coating handles batch work at its Warwick, Rhode Island shop, including blasting prep and colors from the Prismatic Powders library.
We take metal parts from one-off pieces to repeat batches: railings, gates, brackets, frames, mounts and fabricated parts. Parts can be blasted in-house first, so you do not need a separate prep vendor.
Send us the part, rough dimensions, quantity, color and how often you need it. We will quote the job and talk through scheduling for recurring work.
Why it is worth doing right
01
Consistent batches
Parts in the same run are coated and cured together for an even, matching finish.
02
Prep in the same shop
Blasting and coating under one roof means fewer handoffs and less time for bare steel to rust.
03
Outdoor durability
Cured powder generally resists chips, UV and moisture better than typical liquid paint, which matters for railings and exterior parts.
04
Huge color range
Standard blacks and whites or a specific color from the Prismatic Powders library.
Good fit for
- Metal fabricators
- Contractors with railings and gates
- Brackets, mounts and frames
- Small manufacturing runs
- Body shops and dealers
- Iron railings, patio tables and chairs
- Home radiators, motorcycle and boat parts
- Recurring batch work
How it works
How Industrial Powder Coating works at our shop
01
01
Send specs
Photos or drawings, dimensions, quantity, color and finish, plus whether the job repeats.
02
02
Quote and schedule
We confirm pricing and timing once we know the parts and the batch size.
03
03
Clean and blast
Parts are cleaned and blasted as needed, and threads or contact surfaces are masked.
04
04
Coat and cure
Powder is applied and cured in the oven, then the batch is checked before pickup.
Real work
Out of the oven in Warwick
Send a photo of your wheels or parts and tell us the color you want. We reply with a ballpark price and the next steps.
See the galleryGoogle Reviews
What customers say
From our 94 reviews on Google.
“I recently had my CRV wheels powder coated black and couldn’t be happier. Ocean State did a terrific job in less than two days.”
Jennifer Hebert
Google review
“I was immediately impressed with the communication and turnaround time. I was quoted a figure, and they held to it. That almost never happens with any work I have done on this custom truck.”
Michael Narbut
Google review
Reviews collected from Google Business Profile.
Industrial Powder Coating: common questions
Yes. We coat metal parts for contractors, fabricators, body shops, dealers and other businesses, from single pieces to batches.
It depends on our oven and booth capacity. Send us the dimensions of your largest part and we will confirm before you bring anything in.
Tell us how often you need parts coated and the typical quantity, and we will talk through a schedule that works for both sides.
Yes. Parts with rust, mill scale or old coatings are blasted in our shop before powder coating.
Batch pricing depends on part size, shape, quantity, prep and color. Send photos or drawings with quantities and we will quote the job.
From the blog
Guides & Resources
Straight answers on cost, durability, curb rash, cracked rims and colors.
How Much Does It Cost to Powder Coat Wheels? (2026 Price Guide)
A straight breakdown of what most shops charge to powder coat wheels and rims, and the factors that push a set of four up or down.
Read the guide
Powder Coating vs Painting Wheels: Which Finish Holds Up Better?
An honest side-by-side of powder coat and paint on wheels, covering durability, cost, finish options, and when paint is actually the better pick.
Read the guideHow Long Does Powder Coating Last on Wheels and Metal Parts?
Realistic lifespans for powder coat on wheels and metal parts, plus the salt, prep, and cleaning factors that decide whether it lasts.
Read the guide