Skip to main content
Ocean State Powder Coating logo
Powder coating work at the Warwick, RI shop

Serving Connecticut, CT

Powder Coating for Connecticut Customers

We do not have a shop in Connecticut. All of our work is done in Warwick, Rhode Island, and for a lot of eastern Connecticut that is closer than people expect.

Call (401) 919-5579
  • 94 Google reviews
  • Shop in Warwick, RI
  • Free quote from a photo

The short answer

Powder coating for Connecticut drivers and businesses

Ocean State Powder Coating serves Connecticut customers from its shop at 100 Minnesota Ave in Warwick, RI. From eastern Connecticut towns like Mystic, Groton and Putnam the drive is typically under an hour, while the Hartford area is typically about 1.25 to 1.5 hours. All coating and repair is done in Warwick. Text a photo for a ballpark price first.

From the shoreline (Mystic, Groton, New London) it is a straight run up I-95, and from the Quiet Corner and Norwich area I-395 connects to Route 6 or I-95 heading into Rhode Island. The Hartford area is a longer trip, so a photo by text first matters more the farther west you are.

Text us a photo of your wheels or parts and we will give you a ballpark price before you plan the drive.

Shoreline: Mystic, Groton and New London

Along the shoreline, salt air from Long Island Sound adds to winter road salt. Cars, trucks and boat trailers around Mystic, Groton, Stonington and New London see corrosion start early, especially on wheels with chips or curb rash.

From most shoreline towns our Warwick shop is typically about 45 minutes to an hour up I-95. We also coat boat and marine parts, so trailer and boat hardware can come along with a set of wheels in the same trip.

Norwich, Willimantic and the Quiet Corner

Customers from Norwich, Willimantic, Putnam and the towns along I-395 deal with long winters, back roads treated with salt and sand, and plenty of frost heaves come spring. Trucks and work vehicles are common here, and their wheels take the most abuse.

From Putnam or Norwich the drive is typically under an hour; Willimantic is typically about an hour. Bring wheels with tires mounted and we handle the dismount, repair, coating, remount and balancing in one shop.

Hartford area: plan the trip

From Hartford and the surrounding towns the trip is longer, typically about an hour and a quarter to an hour and a half via I-84 and I-384 to Route 6, or I-91 to I-95. Hartford-area drivers deal with heavy commuter traffic, potholes on I-84 and constant road construction.

For a trip that long, text clear photos of every wheel or part first. You will get a ballpark price, and we will flag anything (cracks, bends, old repairs) that needs an in-person look. The final price is set once the part is at the shop.

Why Connecticut customers use our shop

  • Clear about location: all work is done at our Warwick, RI shop
  • Ballpark price by text photo before you cross the state line
  • If the finish is not right, we redo it at no cost
  • Over 20 years in business; wheels, calipers, railings, boat parts and more

Services for Connecticut

Google Reviews

What customers say

From our 94 reviews on Google.

  • “I wanted to thank you guys for the amazing job done to my wheels and brake calipers. The powder coat finish looks perfect and flawless!”

    Jonathan M

    Google review

  • “I recently had my CRV wheels powder coated black and couldn’t be happier. Ocean State did a terrific job in less than two days.”

    Jennifer Hebert

    Google review

  • “I was immediately impressed with the communication and turnaround time. I was quoted a figure, and they held to it. That almost never happens with any work I have done on this custom truck.”

    Michael Narbut

    Google review

Reviews collected from Google Business Profile.

Powder coating in Connecticut: questions

No. All work is done at our shop at 100 Minnesota Ave in Warwick, RI. From eastern Connecticut it is typically under an hour; from the Hartford area typically about 1.25 to 1.5 hours, depending on traffic.
Mostly eastern and central Connecticut: Mystic, Groton, New London, Stonington, Norwich, Putnam, Willimantic and the Hartford area, using I-95 or I-395 to reach Warwick.
Yes. Boat and marine parts and other metal hardware can be sandblasted and powder coated, as long as they fit in our oven. Send photos and rough sizes first so we can give you a ballpark.
A photo by text gets you a ballpark price. The final price is set once the part is at the shop, since hidden cracks, old repairs or extra prep can change the job.

Getting to the shop

100 Minnesota Ave, Units 5 & 6, Warwick, RI 02888
Monday to Friday, 8:00 AM to 4:30 PM

Also serving: Mystic, Groton, New London, Norwich, Putnam, Willimantic.

Send a photo of your wheels or parts from Connecticut. We reply with a ballpark price and the next steps.

From the blog

Guides & Resources

Straight answers on cost, durability, curb rash, cracked rims and colors.

View all guides